AUDI | SEAT | SKODA | VW SPECIALIST Tel: +44 (0) 1278 453036 

Powerflex Black Rear Trailing Arm Inner Bushes (Part no: PFR19-111BLK) — £62.26 RRP: £69.17

Click on image to zoom in
Number of Bushes Supplied: 2
Location on Diagram below: 6
Part Number: PFR19-111BLK
Years: to 1996
Product Notes: PFR19-111 - Inner bush kit is supplied with mounting bolt. Original Ford bolt needs to be cut off to be removed. Full details enclosed with fitting instructions. The inner bush kit (PFR19-111) is complete with two M12 x 90mm bolts and nylock nuts. It is not possible to remove the old bush from the inner swinging arm because of the location of the rear differential. To remove the old bush it is best to undo the retaining nut and then cut the head off of the bolt with a hacksaw or angle grinder. Then remove the bolt from the nut end. Fit the new bushes the rear beam assembly needs to be lowered to enable removal of the old bushes. It may be necessary to remove the rear trailing arm complete and use a hydraulic press to remove the old bushes. Re-assemble these bushes into suspension components using a small smear of the grease supplied. To get the most benefit from your new bushes we recommend that the suspension geometry is checked and set after fitting any new bushes.

For 15 years Powerflex have been the market leader in high performance polyurethane suspension bushes with the widest and fastest growing product range. Powerflex bushes are developed to offer the best of all worlds:
  • Performance
  • Durability
  • Safety
To achieve these properties Powerflex products are manufactured using four unique polyurethane blends. This approach has helped Powerflex become the world leader. However there are a number of applications where chassis performance is the only consideration.

For the ultimate in performance Powerflex introduce The Black Series, a new range of bushes developed for Race, Rally and Circuit Use.

Powerflex Black Series - Designed for the Track - Ready to Race - Engineered to be the best.

Powerflex Black Series bushes are manufactured using a 95 Shore A compound to provide maximum control of chassis geometry. This compound can be up to 80% more resistant to load than standard rubber and 25% stiffer than our purple performance material.

If your requirements are purely for the ultimate in handling and chassis performance then Powerflex Black Series are unique, offering the most precise and accurate alignment for your chassis.

Performance - Developed for ultimate performance using the toughest materials.

Precision - Engineered for the most accurate control of chassis geometry.

Practical - Manufactured to be easily fitted without the need for special tools. 
Our site uses cookies. For more information, see our cookie policy. ACCEPT COOKIES MANAGE SETTINGS