AUDI | SEAT | SKODA | VW SPECIALIST Tel: +44 (0) 1278 453036 
Translate 

Powerflex Black Front Lower Wishbone Rear Bushes (Part no: PFF1-812BLK) — £68.47 RRP: £76.08

Click on image to zoom in
Quantity:
Number of Bushes Supplied: 2
Location on Diagram below: 2
Part Number: PFF1-812BLK
Years: 1997 - 2007
Product Notes: These bushes are designed to fit genuine Alfa control arms, if non genuine arms please contact your Powerflex distributor first There can be an issue with the pin diameter for PFF1-812 sleeves on non-genuine arms. The genuine arms have a pin diameter of 20mm, the non genuine arms have a pin diameter of 21.3mm. If you have arms with 21.3mm pin for the 812 bush then telephone and we will send you replacements. PFF1-812 kit comes with different sized rings. Select the correct ring depending on the rear bracket fitted. Use smaller ring (802b) with the aluminium bracket and 802c with the pressed steel bracket. It is only possible to fit these bushes after removing the arms from the car. For arms fitted with the pressed steel rear bracket the rubber bush may need to be burned out using a blowtorch, then the bracket cleaned up to ensure a good surface. WE RECOMMEND THE USE OF LOCTITE 648 OR 848 TO SECURE CENTRE SLEEVE TO ARM.

For 15 years Powerflex have been the market leader in high performance polyurethane suspension bushes with the widest and fastest growing product range. Powerflex bushes are developed to offer the best of all worlds:
  • Performance
  • Durability
  • Safety
To achieve these properties Powerflex products are manufactured using four unique polyurethane blends. This approach has helped Powerflex become the world leader. However there are a number of applications where chassis performance is the only consideration.

For the ultimate in performance Powerflex introduce The Black Series, a new range of bushes developed for Race, Rally and Circuit Use.

Powerflex Black Series - Designed for the Track - Ready to Race - Engineered to be the best.

Powerflex Black Series bushes are manufactured using a 95 Shore A compound to provide maximum control of chassis geometry. This compound can be up to 80% more resistant to load than standard rubber and 25% stiffer than our purple performance material.

If your requirements are purely for the ultimate in handling and chassis performance then Powerflex Black Series are unique, offering the most precise and accurate alignment for your chassis.

Performance - Developed for ultimate performance using the toughest materials.

Precision - Engineered for the most accurate control of chassis geometry.

Practical - Manufactured to be easily fitted without the need for special tools.